With a bang the old Walter’s Bridge was down.

The new bridge has been completed for a little while now and much work has been done stripping stuff off the old steel bridge. I saw something indicating that the old bridge was going to be dynamited at noon on March 20. I planned to go out and get some pictures.

As I was getting out of the shower and dressed around 9:30 I heard a powerful bang. I knew what it was right away. Dang.

Walter’s Bridge just after being dynamited into the water.

Barely visible down in the water is the old steel bridge. Behind it is the new bridge. Continue reading “With a bang the old Walter’s Bridge was down.”

This was supposed to be snow

We had such dire predictions for snow today. The roads are all brined, my vehicles are salted – thanks to the brine. But it missed us.

Not only did it miss us but we got some nice weather. When Nat called and told me she needed a couple of documents I jumped on the bike to deliver.

I did a little bit of touring on my way home. I wanted to get a look at the progress on the new bridge at Dandridge. It’s moving along kinda slowly. That seems to be the way these go around here. Maybe the concrete needs to set up for a while before they continue…

Checking on the progress on the new Dandridge bridge.

I also hit a couple of roads off 25/70 on the way home that took me into some cool areas I had never seen before. I’ll have to go back again when taking pictures is easier.

1996 Buick Roadmaster Estate Wagon for sale

Sold as of January 2, 2017

This car has served me quite well for years working in tandem with my heavy duty pickup truck to do the things I need. The Buick was great for hauling various loads including full 4×8 sheet goods – plywood, drywall, whatever. The truck handled that stuff better but wasn’t nearly as comfortable. Sadly my truck died and I decided to replace it with a Chevy Tahoe that also takes the place of this car. Continue reading “1996 Buick Roadmaster Estate Wagon for sale”

Set out to make some simple wiring changes.

I needed to change some simple wiring in my basement. The lights in my hallway were to be included into a longer lighting path. I needed to disconnect them from the power source and swap a couple of switches from 3 way to 4 way.

light switches
Mostly normal looking light switches.

Looking into the switch box I don’t see too much out of place but there’s an odd lack of wires and a wire nut that shouldn’t be where it is. Hm.

I noticed looking at the top of the wall in the unfinished part of the basement that there were some “extra” wires coming out of the top of the wall. Continue reading “Set out to make some simple wiring changes.”

New Vehicle time

I used my pickup truck several times on the interstate recently. The vibration I’ve noticed before got worse. I checked the U-joints and they were sound. That meant the problem was elsewhere. Looking at the bottom side of the truck I decided to trade it in.

I found a 2009 Chevy Tahoe LTZ with a lot of great features used at a dealer in Kingsport. It had been there quite a while and the price was down already. When I called about it the price dropped again. Continue reading “New Vehicle time”

Bent my RT

Taking a nice scenic ride on Monday after Mother’s Day I managed to discover a new hazard on the roads. Roads were dry after a rain but darkness under a tree in a corner caught my attention. Rightly so it turned out as that was sap from the tree wetted by the rain. Slick!

I did my best dance to keep the bike under control but came up short. I went down hard on my left side. With help from a passing motorist we righted the bike and I found fairly minimal damage to the bike. I was hurting pretty bad but still plenty able to ride.

My left side mirror had popped off. No problem I thought; it’s mounted on pins and rubber sockets. I couldn’t get it lined up though. On the 280 mile ride home from crashing that was my biggest frustration. I never realized how often I grab a peek in my mirrors.

In order to find out why it wouldn’t go back on I started dismantling the bike. This is where I am.

First a picture showing the armature that supports the left side of the fairing and the mirrors.

Overview of mirror support
Overview of mirror support

I┬ámeasured from that center cross section out to the pins that hold the mirrors. It turns out that the left side is pushed in by roughly 1/4″. Next is to figure out how to apply smooth controlled pressure outward on it to get it back in position.

Here’s just the left side. I can’t really see what’s bent but there’s a round arm supporting the mirror part. The bar I’m focused on is not overly visible.

Left framework
Left framework

Here’s the right side not quite as disassembled.

Right framework
Right framework

After moving the bike out where I can better get to it I got back on fixing it. I had tried a couple of different ways to push the mirror bracket back into position but finally realized the best tool for the job was my 20 year old Harbor Freight hydraulic ram set. It was the first thought but I didn’t figure out how to use it that time.

Being a little more mobile this time I dragged out a table that would allow me to set up the pump within easy reach of where I needed the ram. Stacking the right pieces helped too, and last but definitely not least was sawing up a small chunk of plywood to let me apply pressure to the right parts.

Here’s the ram in position.

Ram in position to push the mirror out.
Ram in position to push the mirror out.

Closeup of the block that kept me from distorting the smaller parts that support the mirror and some of the fairing parts.

Block in place

Next after moving things just 1/4″ I test fit the mirror next to the dash. After the crash it would not push back on.

The mirror fits perfectly now. No gap either.
The mirror fits perfectly now. No gap either.

And one last picture with everything put back together.

The bike back together and ready to ride.
The bike back together and ready to ride.

Old stuff is just cool

I’ve driven past this place for a while and finally decided to check out what’s here. Among other things there are a couple of large scale wood working machines. I’m pretty sure one is a planer. The other may be for making specific lengths of wood but I’m not sure.

Planer end other

Planer end

Mystery machine 1

Mystery Machine 2

And sadly a pile of what was probably once nice wood just stacked and rotting. There were several such stacks.

Wasted wood